Our newly designed Kemper Exhaust Hood was developed in cooperation with welders all over the world and designed with welders in application tests.
The optimal design and easy handling qualities of the hood makes it very well accepted.
The acceptance of a welding smoke exhaust system depends a lot on the handling comfort of the exhaust hood.
The new Kemper exhaust hood has been designed to create a longish extraction area and is therefore especially suitable for the extraction at welding joints.
The exhaust hood is rotatable 360º. Even if the welder is positioned laterally or behind the exhaust arm, the exhaust hood can be brought in the optimal position: Lengthwise to the welding joint!
Optionally equipped with light kit.
KEMPER Exhaust Hood:
The oval suction area can be positioned parallel to the welding joint allowing optimal extraction.
Due to its rotability, the shape of the hood opening can be adapted to the welding seam at any time.
Therefore the efficiency of the KEMPER Exhaust Hood is about 40 % higher than with a conventional exhaust hood.
Conventional Exhaust Hood
Conventional Exhaust Hood:
Kemper Rotating Exhaust Hood:
The KEMPER Exhaust Hood is rotatable 360º and can consequently be aligned with the welding seam into every position.
Wether the welder is standing next or behind the exhaust unit, an optimum in handling comfort is guaranteed.
- Laterally positioning or
- Behind exhaust arm positioning
|79 103 00||Replacement Hood w/o Light Kit|
|79 103 11||Replacement Hood w/ Light Kit|
|79 103 015||With Light Kit and Transformer|